Operating Instructions
35

Switching Off the Dishwasher

Only switch the dishwasher off when the multi-display indicates “0“ for
the remaining programme time and L is illuminated on the pro-
gramme progress display.
If the acoustic signal has been switched on there will be a continuous
signal for 15 seconds at the end of the wash programme.
0 1. Press the ON/OFF switch.
All indicators go out.
1 Hot steam may escape if the door is opened immediately after the end
of the programme. Therefore:
2. Open the door carefully.
If you do not switch off the dishwasher, the acoustic signal will sound
again 3 minutes later and 6 minutes later.

Emptying the Dishwasher

3 • Hot dishes can be sensitive to knocks. The dishes should therefore be
allowed to cool down before removing them from the appliance.
• Leave the dishes in the dishwasher for approx. 15 minutes after the
end of the programme so that they dry better and can cool down.
• Empty the lower rack first, then the upper rack. This will avoid any
water left on the upper rack dripping onto the dishes in the lower
rack and causing water spots.
Care and Cleaning
1 Do not under any circumstances use furniture care products or aggres-
sive cleaners.
• If necessary, clean the controls only with a soft cloth and pure warm
water.
• Occasionally check the internal containers, door seal, and water inlet
for soiling, clean if necessary.