AEG BP7714000 Installation, centre, front frame of the oven cavity, Problem, Possible cause

			Installation
				27
Problem	Possible cause		Solution
The oven lamp does not oper-	The oven lamp is defective	Replace the oven lamp.
ate
The display shows C2	You want to start the Pyrolytic	Remove the core temperature
	cleaning, Keep warm or Defrost	sensor plug from the socket.
	function but you did not re-
	move core temperature sensor
	plug from the socket.
The display shows C3	You want to start Pyrolytic	Close the door correctly.
	cleaning but you did not close
	the oven door correctly.
The display shows F102	The door lock is defect	• Close the door correctly
		•	Deactivate the appliance
			with the house fuse or the
			safety switch in the fuse box
			and activate it again
		•	If the display shows F102
			again, refer to the Customer
			Care Department
The display shows an error	There is an electronic fault	•	Deactivate the appliance
code.			with the house fuse or the
			safety switch in the fuse box
			and activate it again
		•	If the display shows the er-
			ror code again, refer to the
			Customer Care Department
Steam and condensation col-	You left the dish in the appli-	Do not let the dishes stay in
lect on the food and in the ap-	ance for too long.	the appliance for longer than
pliance.		15-20 minutes after the cook-
		ing is completed.

If you cannot find a solution to the problem yourself, contact your dealer or the service

centre.

The necessary data for the service centre is on the rating plate. The rating plate is on the

front frame of the oven cavity.

We recommend that you write the data here:

Model (MOD.).........................................

Product number (PNC).........................................

Serial number (S.N.).........................................

INSTALLATION

WARNING!

Refer to "Safety information" chapter.