16Clock functions
Symbol |
| Function |
| Description |
|
|
|
|
|
|
| End Time |
| To set the |
|
|
| min). | |
|
|
|
| |
|
|
|
|
|
You can use Duration and End Time at the same time, if you want to automatically activate and deactivate the appliance on a given time later.
If you set the time for a clock function, the time starts to count down after 5 seconds.
If you use the clock functions Duration and End Time , the appliance deactivates the heat- ing elements after 90 % of the set time. The appliance uses the residual heat to continue the cooking process until the time ends
Setting the Duration and End Time
1.Set the oven function.
2.Press 
again and again until the display shows the necessary clock function and the related symbol.
3.Use shuttle to set the necessary time. Press OK to confirm.
After 90 % of the set time, an acoustic signal sounds. The appliance deactivates. The display shows a message.
4.Press a sensor field or open the door to stop the signal.
With Duration and End Time the appliance deactivates automatically.
With Duration and End Time you must set the heating function and the temperature first. Then you can set the clock function.
When you use Core Temperature Sensor, Duration and End Time do not work.
Heat + Hold
You can activate or deactivate the function in Basic Settings menu.
The Heat + Hold function keeps prepared food warm at 80° for 30 minutes. It activates af- ter the baking or roasting procedure ends.
Conditions for the function:
•The set temperature is more than 80°C.
•The function Duration is set.
Activating the function
1.Activate the appliance.
2.Select the oven function.
3.Set the temperature above 80°C.
4.Press 
again and again until the display shows Heat + Hold . Press OK to confirm. When the function ends, an acoustic signal sounds.
