Operating Instructions
Prior to using for the first time
Prior to using for the first time, remove all the clips with which the dish racks are secured for transport.
Then perform the following steps: 0 1. Adjust the water softener
2.Fill with Salt for the Water Softener
3.Fill with Rinse Aid
Adjusting the Water Softener
| To prevent the build up of limescale on dishes and in the dishwasher, |
| the dishes must be washed with soft, i.e. low lime content water. For |
| this reason the dishwasher is fitted with a water softener in which tap |
| water from a hardness of 4 °d (German degree) is softened with the aid |
| of special salt. |
3 | Your local water authority can advise you on the hardness of the water |
| in the area where you live. |
The water softener can be set to any of 5 settings:
| Water Hardness |
| Adjust | Number of |
in °d1) | in PPM2) | Range | to Hardness Setting | Flashes |
41 - 50 | 730 - 900 | IV | 5 | 5 |
30 - 40 | 530 - 720 | IV | 4 | 4 |
19 - 29 | 330 - 520 | III/IV | 3 * | 3 |
4 - 18 | 70 - 320 | I/II/III | 2 | 2 |
|
|
| 1 |
|
less than 4 | less than 70 | I | no salt | 1 |
|
|
| necessary |
|
|
|
|
|
|
1)(°d) German degree, measure of the hardness of water 2)(PPM), Parts Per Million, international units of water hardness *factory setting
Adjust the water softener to the setting given in the table that corresponds to the hardness of the water in the area where you live.
10