| Operating Instructions |
| Pause function |
3 | The pause function can only be initiated before the drying section of |
| the programme I.. If the pause function is initiated during the drying |
section of the programme I the wash programme is ended.
Using the pause function the dishwasher can be temporarily stopped: 0 1. Press the ON/OFF button. The wash programme will stop.
2.All indicators will go out.
3.After a short time when the wash programme is to continue, press the ON/OFF button again. The wash programme will continue.
2 | The wash programme should not be stopped for a prolonged period or |
| the cooled water will need to be reheated resulting in increased energy |
consumption.
Switching Off the Dishwasher
Switch off the dishwasher when Lis illuminated on the programme progress display.
0 1. Press the ON/OFF button guishes.
1 | Hot steam may escape from the appliance when opening the door |
| immediately after the end of the programme. |
2.Open the door carefully.
| Emptying the Dishwasher |
3 | • The dishes should therefore be allowed to cool down before removing |
| them from the appliance, as hot dishes may be sensitive to knocks. |
• Leave the dishes in the dishwasher for approx. 15 minutes after the end of the programme so that they dry better and can cool down.
• First empty the lower rack, and then the upper rack. This will avoid any water that may be remaining in the upper rack, dripping onto the dishes in the lower rack and leaving water marks.
23