Operating Instructions

What to do, if ...

Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call an engineer to resolve a of fault listed here, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

...Fault warnings are displayed.

•If the top or middle light in the display is flashing you can probably rectify the fault yourself.

Once the fault has been rectified press the ON/OFF button. The wash programme will continue. If the fault is displayed again, contact your local AEG Service Force Centre.

•If other lights flash in the multi-display, please contact your local AEG Service Force Centre stating which fault indicator is flashing.

 

Symptom:

Possible Cause

Solution

The top light in the multi-

Tap is blocked or furred with

Clean tap.

display is flashing.

lime-scale.

 

 

 

 

 

 

The filter (where present) in

Clean the filter in the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the threaded hose fitting is

 

 

 

 

 

threaded hose fitting.

 

 

 

 

 

blocked.

 

 

 

 

 

 

 

 

 

 

 

The water inlet hose

Check hose

There is no water

entering the dishwasher.

is not correctly laid.

installation.

The middle light is flash-

The sink outlet is blocked.

Clean the sink outlet.

ing in the multi-display.

 

 

 

 

 

 

 

The water drain hose

Check hose

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

is not correctly laid.

installation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The top and the

 

 

middle light are flashing

 

 

in the multi-display.

The anti-flood system has

Close the tap and con-

 

 

 

 

 

 

 

 

 

 

tact your local AEG

 

 

 

 

 

been triggered.

 

 

 

 

 

 

 

 

 

 

Sevice Force Centre.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

26