![](/images/new-backgrounds/1070808/7080843x1.webp)
However, to ensure accessi- bility to the gas connection there should generally be at least 50 mm between the rear of the hole for the gas hob and the wall behind it.
1.Cut a hole in the worktop of the given dimensions, see “Technical data”, “installation dimensions”.
2.Place the hob upside down on a soft underlay. Make sure not to scratch the top surface.
3.Mount the fixings in the holes in the sides of the base box. (See fig.).
4.Insert the hob in the hole and tighten the fixings to the worktop with a screwdriver.
Mounted clamping fittings
22