AEG HK654070XB user manual Assembly, Min mm

6Installation instructions

•Install correctly to give shock protection.

•Loose and incorrect plug and socket connections can make the terminal become too hot.

•A qualified electrician must install the connections in the clamps correctly.

•Use a strain relief clamp on cable.

•Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or two phase connection.

•Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or higher). Speak your local Service Centre.

The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm.

You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.

Assembly
	min.
min.	500mm	min.
50mm		50mm

R5mm

600mm

=	490+1mm 560+1mm
	=

min. 25 mm

min. 20 mm

min. 28 mm