Check the position of the flap
1. Pull out the detergent dispenser until it
stops.
2. Press the lever down to remove the dis-
penser.
3. To use powder detergent, turn the flap
up.
4. To use liquid detergent, turn the flap
down.
With the flap in the position DOWN:
– Do not use gelatinous or thick liquid de-
tergents.
– Do not put more liquid detergent than
the limit showed in the flap.
– Do not set the prewash phase.
– Do not set the delay start function.
5. Measure out the detergent and the fab-
ric conditioner.
6. Carefully close the detergent dispenser.
Make sure that the flap does not cause
a blockage when you close the drawer.
Set the delay start
1. Touch button 7 again and again to set the desired delayed start. The display shows
the expected end of the programme
2. Touch button 6 , the appliance starts the countdown of the delay start.
When the countdown is completed, the programme starts automatically.
Before you touch button 6 to start the appliance, you can cancel or change the set of the
delay start.
20