1
2
5. When the container is full of water, put
the drainage duct back again and emp-
ty the container. Do steps 4 and 5 again
and again until no more water flows
out from the drain pump.
6. Pull back the drainage duct and turn
the filter to remove it.
7. Remove fluff and objects from the
pump.
8. Make sure that the impeller of the
pump can turn. If this does not occur,
contact the service centre.
1
2
9. Clean the filter under the water tap and
put it back in the pump into the special
guides.
10. Make sure that you tighten correctly
the filter to prevent leakages.
11. Put the flap back and close the drain
pump door.
The inlet hose filter and the valve filter
It could be necessary to clean the filters when:
• The appliance does not fill with water.
• The appliance fills with the water for a long time.
• The indicator of button 6 flashes and the display shows the related alarm. Refer to
'Trouble shooter and service'.
WARNING!
Disconnect the mains plug from the mains socket.
Care and cleaning 27