Check the content is complete:

♦PROTECT A. with 500 or 700 VA

♦Mains connection cable with shockproof plug acc. to CEE 7/7

Second mains connection cable with UK plug acc. to BS 1363

♦Two device connecting cables

♦USB / RS232 communication cable

♦Management software “CompuWatch” on CD

♦Operating instructions

Please contact our hotline (see page 5) in case of any discrepancy.

The original packaging provides effective protection against mechanical shocks and should be retained so the unit can be transported safely later on.

Please keep the plastic packaging bags away from babies and children in order to safeguard against suffocation accidents.

4.2Installation Site

PROTECT A. is designed to be installed in a protected environment. When installing the unit, pay attention to such factors as sufficient ventilation and suitable ambient conditions.

PROTECT A. is air-cooled. Do not obstruct the air vents!

The UPS should preferably be operated at room temperature (between 15° C and 25° C).

Install the UPS in a room that is dry, relatively dust-free and free of chemical vapours.

Make sure that no magnetic storage media are stored and/or operated close to PROTECT A.

Check the nameplate to make sure the voltage and frequency data correspond to the values applicable to your loads.

18