AEG S94400CTX0 manual What To Do If…

What to do if… 19

• leave the door/doors ajar to prevent unpleasant smells.

If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.

WHAT TO DO IF…

WARNING!

Before troubleshooting, disconnect the mains plug from the mains socket.

Only a qualified electrician or competent person must do the troubleshooting that is not in this manual.

Problem	Possible cause	Solution
The appliance does not	The appliance is switched off.	Switch on the appliance.
operate. The lamp does
not operate.
	The mains plug is not connected	Connect the mains plug to the
	to the mains socket correctly.	mains socket correctly.
	The appliance has no power.	Connect a different electrical ap-
	There is no voltage in the mains	pliance to the mains socket.
	socket.	Contact a qualified electrician.
The lamp does not work.	The lamp is in stand-by.	Close and open the door.
	The lamp is defective.	Refer to "Replacing the lamp".
The compressor operates	The temperature is not set cor-	Set a higher temperature.
continually.	rectly.
	The door is not closed correctly.	Refer to "Closing the door".
	The door has been opened too	Do not keep the door open longer
	frequently.	than necessary.
	The product temperature is too	Let the product temperature de-
	high.	crease to room temperature be-
		fore storage.
	The room temperature is too	Decrease the room temperature.
	high.
Water flows on the rear	During the automatic defrosting	This is correct.
plate of the refrigerator.	process, frost defrosts on the
	rear plate.
Water flows into the re-	The water outlet is clogged.	Clean the water outlet.
frigerator.
	Products prevent that water	Make sure that products do not
	flows into the water collector.	touch the rear plate.
Water flows on the	The melting water outlet does	Attach the melting water outlet
ground.	not flow in the evaporative tray	to the evaporative tray.
	above the compressor.