First use |
|
11 | |
|
|
1.Press the Mode button until the FROSTMATIC indicator flashes.
2.Press the OK button to confirm.
3.The FROSTMATIC indicator goes off.
The function switches off by selecting a different freezer set temperature.
High temperature alarm
An increase in the temperature in the freezer compartment (for example due to an earlier power failure) is indicated by:
•flashing the alarm and freezer temperature indicators
•sounding of buzzer.
To reset the alarm:
1.Press any button.
2.The buzzer switches off.
3.The freezer temperature indicator shows the highest temperature reached for a few seconds. Then show again the set temperature.
4.The alarm indicator continue to flash until the normal conditions are restored. When the alarm has returned the alarm indicator goes off.
Door open alarm
An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm conditions are indicated by:
•flashing Alarm indicator
•acoustic buzzer
When normal conditions are restored (door closed), the alarm will stop.
During the alarm, the buzzer can be switched off by pressing any button.
FIRST USE
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand- new product, then dry thoroughly.
Do not use detergents or abrasive powders, as these will damage the finish.
If “dEMo” appears on the Display, the appliance is in demonstration mode: refer to “WHAT TO DO IF...” paragraph.
