AEG S94400CTX0 manual Location, Electrical Connection

Models: S94400CTX0

1 28
Download 28 pages 10 Kb
Page 22
Image 22
Location

22Installation

Location

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely

around the back of the cabinet.To ensure best

performance, if the appliance is positioned below an overhanging wall unit, the minimum distance

between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the

appliance should not be positioned below over-

hanging wall units. Accurate levelling is ensured by one or more adjustable feet at the base of the cabinet. If the cabinet is placed in a corner and

the side with the hinges facing the wall, the dis-

tance between the wall and the cabinet must be at least 10 mm to allow the door to open enough so that the shelves can be removed.

WARNING!

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

Electrical Connection

CAUTION!

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

WARNING!

This appliance must be earthed.

The manufacturer declines any liability should these safety measures not be observed.

The wires in the mains lead are coloured in accordance with the following code:

Page 22
Image 22
AEG S94400CTX0 manual Location, Electrical Connection