AeroGarden 100610-BLK, 100610-WHT, 100610-SLR Raise Lamp Hood Lights, Early Grow Bulb Replacement

Basic Reminders About Your AeroGarden (continued)

Raise Lamp Hood (Lights)

As plants grow to 1-2” from lights, raise Lamp Arm one Locking Button at a time. Be sure Lamp Arm is set on the lowest Locking Button when starting your AeroGarden 6.

1Unplug AeroGarden 6 and remove Bowl from Base.

2Raise Lamp Arm/Lamp Hood by holding Lamp Arm & Hood with one hand, and pushing in Locking Button with the other.

3Replace Bowl on Base and plug in AeroGarden 6.

Push Locking

Button in

Replace Grow Bulbs – Order bulbs at www.aerogardensupport.com

Add Nutrients

Replace

Bulbs

Early Grow Bulb Replacement

When “Replace Bulbs” light on Control Panel begins blinking after 6 months of use…

•Unplug AeroGarden 6.

•Remove old Grow Bulbs and carefully discard.*

IMPORTANT: To avoid burning, be sure Grow Bulbs are cool before handling.

•Insert new Grow Bulbs into Lamp Hood.

•Plug in AeroGarden 6 and press and release “Reset” button to restart grow bulb timer.

If you replace Grow Bulbs before “Replace Bulbs” light illuminates, be sure to restart grow bulb timer as follows:

•Press and hold “Lights” button until light next to your selected plant type starts blinking – about 5 seconds.

•Release “Lights” button. The plant type selected light will continue to blink for about 9 seconds. While plant light is still blinking…

•Quickly press and release “Reset” button. “Replace Bulbs” light will blink once and the plant selected light will stop blinking.

*Check with local recycling authorities for light bulb recycling availability in your area.

12