AeroGarden 100610-WHT Remove Bio-Domes, Basic Reminders About Your AeroGarden, Select, Water Low

Basic Reminders About Your AeroGarden

AeroGarden6 Control Panel

• Select

The number of hours lights are on and off depends on which plant type is selected.

• Lights On/Off

Use to occasionally override built-in light timer. Once pushed, lights will stay off/on until the next time built-in light timer is set to go on/off. This will not affect the timing of your light cycle, and occasional use of this feature will not harm your plants.

Add Nutrients

Replace

Bulbs

	Herbs
Salad	Flowers
Greens	Water Low
Vegetables	Live Plants

• Add Nutrients

(Feed Garden - Basic Feeding)

When “Add Nutrients” and “Water Low” lights start blinking (every 2 weeks), add 2 nutrient tablets* and fill the Bowl with water up to “Fill to Here.” Press and release “Reset” button to restart nutrient timer and turn off blinking lights.

*See Tending & Harvesting Guide for plant-specific nutrient information.

• Replace Bulbs†

When light blinks (after 6 months of use), it is time to replace Grow Bulbs. Bulbs can be ordered at www.aerogardensupport.com or from your retailer. After replacing Grow Bulbs, press “Reset” button to restart grow bulb timer and turn off flashing light.

NOTE: If you store your AeroGarden 6 between uses, grow bulb timer automatically stops when Garden is unplugged.

†See complete replacement instructions on next page.

• Water Low

When light blinks add water up to “Fill To Here.”

•Remove Bio-Domes

When plants appear through hole in Seed Pod Label, remove Bio-Domeand discard or recycle.

NOTE: Never remove Seed Pod Labels.

11