AG Neovo TSC-30/IC 7. Storage Specification

TSC-30/IC Product S

ecification

7. Storage Specification

For storing the product until its implementation, it is recommended that the following storage conditions are

applied:

1. Before unpacking the damp-proof package (Aluminum laminate bag)

Temperature and humidity: 5 to 40 °C, 20 - 80%RH

Duration: Two years or less

2. After unpacking the damp-proof package (Aluminum laminate bag)

For the storing duration after the damp-proof package is unpacked and before the implementation, it is

recommended that the following storage conditions is to be applied:

(1) Reflow method: Two weeks or less under the ambient condition: 30 °C, 70%RH or less

3. Temporary storage after damp-proof package is unpacked

To store again temporarily the once unpacked and unused damp-proof package, it is recommended to

pack it again into another damp-proof bag with desiccant within a shorter time after opened (Around 10

minutes) as far as possible, and fold the bag’s opening, followed by sealing with adhesive material

such as adhesive tape, then store it under the following conditions:

Temperature, humidity: 5 to 40 °C, 20 - 80%RH

Duration: One month or less

If any condition among those 1 to 3 listed below is applicable, it is recommended to apply the baking as

described below to dry the moisture the package absorbs.

You may place the tray used for damp-proof packaging directly into the thermostatic chamber since the

tray is heat-proof type. When placing into the chamber or after removing from it, to avoid deformation, cool

the tray by placing it on the flat plate such as surface table.

1. Any condition among 1 to 3 in [7-1. Storage condition] is unsatisfied

2. Indicator’s 30% Humidity Check section changes the color to lavender or pink

3. Blue color indicator of desiccant (Silica gel) changes to pink or white

Baking method

Temperature: 125

°C

Duration: 20 to 24 hours

Frequency: Four times or less (Upper limit: 96 accumulative hours)