18. Using the Cycle Print Mode
Operating in the Cycle Print Mode
1 | After entering the Cycle Print Mode, |
press the Start key to start. |
Start
NOTE
•After the first scanning operation has finished, the system will automatically scan the next image following a preset period of time. The system will continue to operate until the Cycle Print Mode is canceled.
•The “No. of Copies” value flashes during the “scanning” and “waiting” operations.
•The next scanning job can be started manually by pressing the Start key before the system automatically initiates the same job.
2 | To pause an operation during the |
Cycle Print Mode, press the Clear key |
(the “No. of Copies” value will switch from a blinking display to a constant display).
3 | While the pause function is enabled, |
it is possible to exit the Cycle Print |
Mode by pressing the Clear key a second time (the value displayed in the “No. of Copies” display will change to a “1”.)