ii
Notes to Operators and Key Operators
The following safety rules should be observed:
[1]The unit should be kept free from moisture, dirt, dust and exposure to heat and direct sun- light at all times.
[2]Keep hands, hair and clothing away from rollers and other moving parts.
[3]Before removing the Projection Lamp Unit, confirm that the machine is turned “OFF”.
[4]Be sure that the proper voltage is used and that the machine is well grounded. The use of electrical extension cords is strongly discouraged.
[5]For best performance, only authorized Minolta supplies are recommended for use with this unit. Failure to use authorized Minolta supplies may cause damage to the unit, in which case the warranty may be rendered void.
[6]Do not attempt to remove any Cover that is secured.
WARNING
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
The design and production of this unit conforms to FCC regulations, and any changes or modifications must be registered with the FCC and are subject to FCC control. Any changes made by the purchaser or user without first contacting the manufacturer will be subject to penalty under FCC regulations.
This Class A digital apparatus complies with Canadian
Cet appareil numérique de la classe A est conforme à la norme
