Agilent Technologies 3138A-00101 and above manual Specifications and Supplemental Characteristics

Specifications and Supplemental Characteristics

Table 1-1 lists the specifications and supplemental characteristics of the MPS mainframe. Module specifications are included in the appropriate module User’s Guide. Specifications are warranted in the temperature range of 0 to 55 degrees C. Supplemental characteristics are not warranted, but are descriptions of minimum, maximum, or average performance that has been determined by design or type testing.

Table 1-1. Specifications and Supplemental Characteristics

PERFORMANCE SPECIFICATIONS

AC Input Ratings

Standard:87- 132 Vac

174- 250 Vac

Frequency tolerance: 47 - 63 Hz

SUPPLEMENTAL CHARACTERISTICS

Maximum AC Line Current Ratings (with 8 power supply modules operating at maximum output)

100 Vac:	29 A rms
120 Vac:	25 A rms
200 Vac:	16 A rms
220/230 Vac:	16 A rms
240 Vac:	15 A rms
Maximum power input:	3200 VA; 1800 W maximum; 1600 W typical
	GPIB Interface Capabilities
Languages:	Standard Commands for Programmable Instruments (see module
	Programming Guide)
IEEE 488.2 Capabilities:	SH1, AH1, T6, L4, SR1, RL1, PPO, DC1, DT1, El, and CO

Serial Link Capabilities (Multiple mainframes sharing one GPIB address)

Number of mainframes: Number of modules: Serial-linked power supplies:

Chain length:

TrigIn/TrigOut Characteristics

Maximum Ratings:

Trig Out (HC TTL output):

Trig In (10k pull-up):

2

16

total number of modules and serial-linked power supplies (Agilent 667xA/665xA/664xA/603xA) cannot exceed 16

30 m (100 ft) maximum

±16.5 V between center conductor and chassis

VOL @ 4 ma = 1.34 V maximum

VOL @ 2 ma = 0.8 V maximum

VOH 4 ma = 2.66 V minimum

VOH 2 ma = 3.18 V minimum

IIL @ 4 V = 700 μA

IIH @ 5.25 V = 200 μA

VIL = 0.8 V maximum

VIH = 2.0 V minimum

General Information 11