Agilent Technologies 54600-Series manual N2758A can Trigger Module

N2758A CAN Trigger Module

•Trigger on CAN 2.0A/B message frames with user specified IDs and/or data

•Trigger on Error frames

•Differential CAN

•Acknowledge On/Off

•Built In QuickHelp

•Remote Control via GPIB/RS232

•Compatible with 54621D, 54622D, 54641D, 54642D

The N2758A CAN trigger module extends your Mixed Signal Oscilloscope’s (MSO) capabilities beyond the standard CAN SOF trigger. The module enables the MSO to isolate and trigger on a particular frame’s content. This triggering allows you to:

•sort through frame traffic on the bus

•isolate frames of interest

•specify particular frame characteristics

•trigger and measure latency between CAN frames meeting the user specification

The CAN trigger module is ideal for analyzing all traffic on the broadcast network. Quickly find frames that meet the specifica- tions you select with an isolating capability similar to pattern triggering across multiple channels in the parallel domain. Synchronize to the particular frame then examine the system behavior of interest.

For more comprehensive information, please see the Agilent 54600-Series Oscilloscopes Probes and Accessories data sheet (Agilent publication number 5968-8153). You can get a copy by calling

1-800-452-4844 or by visiting our website at: www.agilent.com/find/mso

The N2758A kit includes the CAN trigger module, digital cable, ten grabbers, and two probe ground leads.

The N2758A CAN trigger module reduces the time required to debug your mixed signal CAN based designs.

7