Performance Characteristics (continued)
Storage
Save/Recall | 54621A/D, 54622A/D, 54624A: 3 setups and traces can be saved and recalled internally |
| 54641A/D, 54642A/D: 4 setups and traces can be saved and recalled internally |
|
|
Floppy Disk | 3.5” 1.44 MB double density |
| Image formats : TIF, BMP |
| Data formats: X and Y (time/voltage) values in CSV format |
| Trace/setup formats: Recalled |
|
|
I/O |
|
|
|
1 port: XON or DTR; 8 data bits; 1 stop bit; parity = none; 9600, 19200, 38400, 57600 baud rates (use Agilent 34398A cable) | |
|
|
Parallel Standard Port | Printer support |
|
|
Printer Compatibility | HP DeskJet, LaserJet with HP PCL 3 or greater compatibility: |
| Black and white @150x150 dpi; Gray scale @ 600x600 dpi |
| Epson: black and white @180x180 dpi |
| Seiko thermal |
|
|
Optional GPIB Interface | Fully programmable with IEEE488.2 compliance |
Module (N2757A) | Typical GPIB throughput of 20 measurements or twenty |
|
|
Optional Printer Kit | The N2727A is a thermal printer kit, includingprinter power, parallel cable, power cable and paper |
|
|
General Characteristics |
|
|
|
Physical | Size: 32.26 cm wide x 17.27 cm high x 31.75 cm deep (without handle) |
| Weight: 6.35 kgs (14 lbs) on 54621A/D, 54622A/D, 54624A; 6.82 kgs (15 lbs) on 54641A/D, 54642A/D |
|
|
Probe Comp Output | 54621A/D, 54642A/D, 54624A: Frequency ~1.2 kHz; Amplitude ~5 V |
| 54641A/D, 54642A/D: Frequency ~2 kHz; Amplitude ~5 V |
|
|
Trigger Out | 54621A/D, 54622A/D, 54624A: 0 to 5 V with 50 Ω source impedance; delay ~ 55 ns |
| 54641A/D, 54642A/D: 0 to 5 V with 50 Ω source impedance; delay ~ 22 ns |
|
|
Printer Power | 7.2 to 9.2 V, 1 A |
|
|
Kensington lock | Connection on rear panel for security |
|
|
* Denotes Warranted Specifications, all others are typical. Specifications are valid after a
19
