Command :MEASure:VAMPlitude[?] [<source>]
Calculates the difference between the top and base voltage of the specified
source.
<source> {CHANnel<number> | FU NCtion<number> |
RESPonse<number> | WM EMory<number>}
<number> For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
Command :MEASure:VAVerage[?] {CYCLe | DISPlay},[<source>]
Calculates the average voltage over the displayed waveform.
<source> {CHANnel<number> | FU NCtion<number> |
RESPonse<number> | WM EMory<number>}
<number> For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
Command :MEASure:VBASe[?] [<source>]
Measures the statistical base of the waveform.
<source> {CHANnel<number> | FU NCtion<number> |
RESPonse<number> | WM EMory<number>}
<number> For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
Measure Commands
32