The STAT variable The STAT variable is used by the PCI inverse assembler to
decode PCI bus transactions. It should not be changed or
deleted from the format menu. The signals that make up the
STAT variable are listed in the following table. The STAT
variable can be useful to set up SYMBOLS since it contains all of
the key PCI control and status signals.
STAT Variable PCI Bus Signal Name
Bit 29 C/BE7
Bit 28 C/BE6
Bit 27 C/BE5
Bit 26 C/BE4
Bit 25 REQ64#
Bit 24 AVALID_L
Bit 23 WNODEV_L
Bit 22 ACK64# (DATA64)
Bit 21 TABORT_L
Bit 20 DVALID_L
Bit 19 WTARGET_L
Bit 18 IWINITI_L
Bit 17 RETRY_L
Bit 16 SERR#
Bit 15 IDLE_L
Bit 14 PVALID_L
Bit 13 MABORT_L
Bit 12 CPERR_L
Bit 11 STOP#
Bit 10 DEVSEL#
Bit 9 L_CM3
Bit 8 L_CM2
Bit 7 L_CM1
Bit 6 L_CM0
Bit 5 C/BE3
Bit 4 C/BE2
Bit 3 C/BE1
Bit 2 C/BE0
Bit 1 RESET#
Bit 0 PERR#
18