Agilent Technologies HP 16505A, HP 16500B, HP 16500H manual Installing the Interface Module

Installing the Interface Module

To Install the HP 16500H Hardware

3Slide the interface module into the mainframe through the slot in the rear panel.

4Install the screws connecting the interface module to the mainframe.

Two screws through the top of the interface module connect it to the sheetmetal plate, and four screws through the rear plate of the interface module connect it to the rear panel of the mainframe.

5Connect the 80-pin cable to the CPU board and to the interface module.

Before installing the cable, inspect the cable and the connectors for any signs of damage.

a Slide the 80-pin cable halfway through the rear slot of the card cage between the interface module and the CPU board.

b Connect the cable to the CPU board.

c Connect the cable to the interface module.

6Replace the top and bottom covers, the optional modules, and the rear feet of the mainframe.

Installing the Interface Module

2–3