ENGLISH

If your tractor hitch has 10" to 13" ground clearance refer to figure 6. If your tractor hitch has 8" to 10" ground clearance refer to figure 7.

8.(Figure 6 or 7) Assemble the hitch brackets to the hitch tubes using two 5/16" x 2" hex bolts (B) and 5/16" nylock nuts (J). The bolts should straddle the front hitch tube bolt. Do not tighten yet.

9.At this time tighten the four bolts fastening the hitch tubes to the sweeper housing.Next, tighten the two bolts fastening the ends of the hitch tubes together. Finally, tighten the two bolts fastening the hitch brackets to the hitch tubes.

10.(Figure 6 or 7) Assemble the hitch pin (Y), two 3/4" hitch spacers (U) and the 1/8" hair cotter pin (M) to the hitch brackets.

11.(Figure 8) Assemble the height adjustment handle to the inside of the bracket on the end of the height adjustment tube. Use two 5/16" x 1" hex bolts (E), 5/16" flat washers (K) and 5/16" nylock nuts (J). Tighten.

12.(Figure 8) Assemble the grip (W) onto the height adjustment handle.

8

GRIP (W)

5/16" NYLOCK NUT (J)

6

5/16" x 2" HEX BOLT (B)

HITCH PIN (Y)

HITCH BRACKET

3/4" SPACER (U)

HITCH BRACKET (STRAIGHT)

1/8" HAIR COTTER PIN (M)

5/16" x 1" HEX BOLT (E)

5/16" FLAT WASHER (K)

HEIGHT ADJUSTMENT HANDLE

5/16" NYLOCK NUT (J)

13.(Figure 9) Assemble onto a 5/16" x 1-1/4" hex bolt

(D) in the order listed, a 5/16" flat washer (K), the pivot bushing (S), the height adjustment strap and the spacer bushing (T). Insert the bolt through the upper part of the double hole in the end of the sweeper housing and secure it with a 5/16" nylock nut (J). Tighten.

5/16" NYLOCK NUT (J)

7

5/16" x 2" HEX BOLT (B)

HITCH PIN (Y)

HITCH BRACKET

(STRAIGHT) 3/4" SPACER (U)

HITCH BRACKET

1/8" HAIR COTTER PIN (M)

9

5/16" NYLOCK NUT (J)

SPACER BUSHING (T)

HEIGHT ADJUSTMENT

STRAP

PIVOT BUSHING (S) 5/16" FLAT WASHER (K)

5/16" x 1-1/4" HEX BOLT (D)

7