ENGLISH
14. (Figure 10) Place the star washer (L) between the | ASSEMBLY OF HOPPER BAG |
height adjustment handle and the height adjustmenet |
|
strap. Insert the 5/16" x 1" carriage bolt (F) through | 1. (Figure 11) Turn a rear hopper tube so that the brace |
the height adjustment handle, the star washer and the | holes in the middle of the tube face down. Slide the |
height adjustment strap. Assemble a 5/16" flat washer | tube through the two loops sewn to the top rear seam |
(K) and the plastic knob (X) onto the end of the bolt. | inside the hopper bag. |
10
5/16" x 1"
CARRIAGE BOLT (F)
5/16" FLAT WASHER (K)
PLASTIC KNOB (X)
STAR WASHER (L) (between strap and handle)
INNER BAG LOOPS | 11 |
REAR HOPPER TUBE (brace holes on bottom)
2.(Figure 12) Insert the two upper hopper side tubes through the stitched flaps on each side of the hopper bag.
3.(Figure 12) Assemble the ends of the rear hopper tube onto the ends of the upper hopper side tubes. Fasten together using plastic plugs (Z).
PLASTIC PLUG (Z) | 12 |
UPPER HOPPER |
|
SIDE TUBE |
|
8