ENGLISH
(F) 5/16" x 3/4" | (E) 1/4" x 1" |
TRUSS HEAD | HEX BOLT |
BOLT | (J) 1/4" FLAT |
| WASHER |
BOTTOM OF CART
HANDLE
DETENT BUTTON
(L) 5/16" HEX LOCK NUT
(K)1/4" HEX LOCK NUT
FIGURE 8
15.Insert four 1/4" x 1" hex bolts (E) with 1/4" fl at washers
(J)down through the tray and the inside holes in the latch stand plate. Secure the bolts with four 1/4" fl at washers (J) and 1/4" hex lock nuts (K). Do not tighten yet. See fi gure 9.
16.At this time tighten all bolts which were left loose.
(J) 1/4" FLAT WASHER
(I)1/4" LOCK WASHER
(D)1/4" x 1/2" SCREW
FIGURE 10
CART WITH TONGUE ARRANGED FOR TOWING
LATCH LOCK
FRONT
TONGUE
(H) 3/8" x 1"
(J) 1/4" FLAT 
WASHER
(E) 1/4" x 1"
HEX BOLT
CLEVIS PIN
(G) 3/8" x 4"
CLEVIS PIN
FIGURE 11
LATCH
STAND
PLATE
(J) 1/4" FLAT |
|
WASHER | (K) 1/4" HEX |
| LOCK NUT |
FIGURE 9
17.Slide the handle into the channels in the latch stand plate. Push the handle in all the way against the front of the tray by depressing the detent buttons in the bottom of the handle. See fi gure 10.
18.Assemble a 1/4" lock washer (I) and then a 1/4" fl at washer (J) onto each of the two 1/4" x 1/2" screws (D). Assemble the screws (D) into the small holes at each end of the handle. See fi gure 10.
19.Assemble the hitch pin (R) through the tongue and hitch bracket and secure it with the 1/8" hairpin cotter (N). See fi gure 12.
(R)HITCH PIN
HITCH
BRACKET
(N) 1/8" HAIRPIN COTTER
FIGURE 12
7