2.To lock the bag arm channels into position, secure each of them to the side of the sweeper housing with a
17
25 
31 
figure 2
5.Attach the drawbar (14) to the sweeper by fastening a drawbar bracket (8) above and below the drawbar with three 5/16" x
15
8
14
8
21
figure 4
3.Slide a pivot rod retainer (30) into each end of the bag arm channels. See figure 3.
4.Insert a compression spring (32) into the bottom of each of the pivot rod retainers to secure them to the bag arm channels. See figure 3.
30
32
figure 3
6.Lock the drawbar into position by inserting a 3/8" x 3" hitch pin (20) into the center hole and securing it with a 3/32" cotter pin (19). See figure 5
20
19
figure 5
4