23.Slide the dump handle clip (33) over end of dump tube (5) until it is in the location shown in figure 14.
NOTE: Some adjustment to the dump handle clip position may be needed in a later assembly step.
5
33
33
figure 14
26.Attach the dump tube to the upper hopper frame using a
27.Snap the dump handle clip onto the pivot rod. See figure 16.
27 | 24 |
|
34 
16
figure 16
28. Slide the pivot rod into each of the pivot rod retainers on the ends of the bag arm channels. See figure 17.
24. Slide the handle grip (29) onto the end of the handle tube (9) as shown in figure 15.
25. Assemble the handle tube (9) to the dump tube (5) and secure in place with a 1/4" x 1" curved head bolt (26) and 1/4" nylock nut (24).
5
2926
9
24
figure 15 | figure 17 |
7