7. Attach the hitch bracket (12) and straight hitch bracket | 10. Slide a rear hopper tube (11) onto ends of lower |
| ||
| (13) to the drawbar using two 5/16" x | hopper tubes (10) making sure the holes in the rear | ||
| (15) and 5/16" nylock nuts (21). See figure 6. | hopper tube are facing up as shown in figure 8. |
| |
8. Assemble a 3/8" x 3" hitch pin (35) and two 3/4" | 11. Secure the rear hopper tube (11) to the lower hopper | |||
| spacers (22) to the hitch brackets. Secure them in | tubes (10) with two 1/4" x 1" curved head bolts (26) | ||
| place with a 3/32" hair cotter pin (18). See figure 6. | and 1/4" nylock nuts (24). See figure 8. |
| |
|
| NOTE: Hopper bag (3) not shown for clarity. |
| |
|
| 24 |
|
|
|
|
| 11 |
|
|
| 10 | 26 |
|
|
|
|
| |
| 15 |
|
|
|
35 |
| 24 |
| |
| 12 |
| 10 | 26 |
22 |
|
| ||
13 |
|
| ||
|
|
|
| |
| 21 |
|
|
|
18 |
|
|
| |
figure 6
9.Slide ends of two lower hopper tubes (10) into the flaps at the front of the hopper bag (3) as shown in figure 7.
figure 8
12.Slide the upper hopper tubes (6) through flaps in the sides of the hopper bag (3) as shown in figure 9.
13.Slide the upper hopper tubes (6) up inside the hopper bag (3) as shown in figure 9.
3
3
6
10
figure 7 | figure 9 |
|
5