STEP 4: (SEE FIGURE 4)

•Attach the hitch bracket (7) to the hitch tube (5) using two 5/16" x 1-1/4" hex bolts (13) and 5/16" nylock nuts (15).

•Assemble the hitch pin (9) to the hitch tube and hitch bracket and secure it with the hair cotter pin (19).

STEP 6: (SEE FIGURE 6)

•Press the knob (22) onto the end of the flow control lever (23).

•Attach the flow control lever (23) to the control tube (6) with a 1/4" x 1-1/2" hex bolt (12) and 1/4" lock nut (17). Leave the lock nut loose enough that the lever can pivot.

5

15

 

19

7

 

13

9

FIGURE 4

STEP 5: (SEE FIGURE 5)

•Insert the control tube (6) into the left hopper support tube and secure it in place with the 5/16" x 3/4" lag screw (57) and 5/16" lock washer (58).

•Press tube plugs (25) into the right hopper support tube and the control tube (6).

22 17

12

23

FIGURE 6

STEP 7: (SEE FIGURE 7)

•Attach the flow control assembly (4) to the control tube (6) using two 1/4" nylock nuts (16).

HINT: If the bolts spin when tightening, pull on the bolts and turn them until they lock in place. Push in on the flow control dial to help keep the bolts locked in place.

•Insert the control cable into the hole in the control lever (23).

25

25

16

6

58

57

FIGURE 5

FIGURE 7

5