7
GETTING STARTED
SETTING THE PC MASTER STATION
SETTING THE PC MASTER STATION

OUTLINE OF SETTINGS

After installation of the IS-SOFT on the PC has fi nished, make the settings for the PC master station before using it.
Make the settings by following the steps below.
PRECAUTIONS:
Be sure to make the settings before using the PC master station. If the settings have not been made, you cannot use the PC master station.
•
Make the settings correctly. If the settings are not made correctly, the PC master station will not function as you planned.
•
To use a PC master station, it must be registered at
• [IP unit registration] on the IP host unit in advance.
The specifi ed license key is needed for the settings. (Keep the provided license key sheet in a safe place.)
•
Be sure to follow the steps below in that order. If you fail to do so, the settings will not be made correctly.
•
Step 1

Start up the PC master station and make the network setting for

the PC master station. (→P. 10)

NOTE:
Be sure to make this before making the system settings with the IP host unit.
Step 2 Acquire the system setting data
Step 3

Make settings on the PC master station (→P. 10-17)

NOTE:
Be sure to make this after making the system settings with the IP host unit.
Some settings on the PC master station cannot be made if the system settings are
not completed.