Transfer door call | Nederlands |
1.While answering door, press CALL (Room call) button. After sounding a pretone, speak to the rest station(s).
2.At the called station(s), a pretone sounds, and both image and audio of door are activated.
3.Transferred station answers by pressing once TALK button. To end, press TALK button again.
(The channel with door station is held approx. 45 sec.)
4.Communicate with door station after pressing TALK button. Lastly, press TALK button for standby.
For | English |
Turning on/off Alarm (activated by
In standby, keep pressing TALK button for 5 seconds or more. Release TALK button, after the SET tone is heard as follows;
TONE | STATUS OF SETTING |
Peeh | Alarm is off. |
Prrr (3 sec.)
Alarm is 
NOTES: The Alarm ON/OFF can not be changed during communication.
After the power is turned back on (when power failed, etc.), the station is put back to Alarm ON mode.
For | Français |
Turning on/off Alarm (activated by
In standby, keep pressing TALK button for 5 seconds or more. Release TALK button, after the SET tone is heard as follows;
TONE | STATUS OF SETTING |
Peeh | Alarm is off. |
Prrr (3 sec.)
Alarm is 
NOTES: The Alarm ON/OFF can not be changed during communication.
After the power is turned back on (when power failed, etc.), the station is put back to Alarm ON mode.
For | Deutsch |
Turning on/off Alarm (activated by
In standby, keep pressing TALK button for 5 seconds or more. Release TALK button, after the SET tone is heard as follows;
TONE | STATUS OF SETTING |
Peeh | Alarm is off. |
Prrr (3 sec.)
Alarm is 
NOTES: The Alarm ON/OFF can not be changed during communication.
After the power is turned back on (when power failed, etc.), the station is put back to Alarm ON mode.
For | Español |
Turning on/off Alarm (activated by
In standby, keep pressing TALK button for 5 seconds or more. Release TALK button, after the SET tone is heard as follows;
TONE | STATUS OF SETTING |
Peeh | Alarm is off. |
Prrr (3 sec.)
Alarm is 
NOTES: The Alarm ON/OFF can not be changed during communication.
After the power is turned back on (when power failed, etc.), the station is put back to Alarm ON mode.
For | Nederlands |
Turning on/off Alarm (activated by
In standby, keep pressing TALK button for 5 seconds or more. Release TALK button, after the SET tone is heard as follows;
TONE | STATUS OF SETTING |
Peeh | Alarm is off. |
Prrr (3 sec.)
Alarm is 
NOTES: The Alarm ON/OFF can not be changed during communication.
After the power is turned back on (when power failed, etc.), the station is put back to Alarm ON mode.
TECHNICAL PRECAUTIONS
PRÉCAUTIONS TECHNIQUES
TECHNISCHE
VORSORGEMASSNAHMEN
PRECAUCIONES TÉCNICAS
TECHNISCHE
VOORZORGSMAATREGELEN
TECHNICAL PRECAUTIONS | English |
*Operating temperature: 0°C ~ 40°C (+32°F ~ +104°F).
*Cleaning: Clean the units with a soft cloth dampened with neutral household cleanser. Do not use any abrasive cleaner or cloth.
*In case of system malfunction, turn off the power switch at master station. If this doesn't solve the problem, shut DC power down, and contact a qualified technician.
TECHNICAL PRECAUTIONS | Français |
*Operating temperature: 0°C ~ 40°C (+32°F ~ +104°F).
*Cleaning: Clean the units with a soft cloth dampened with neutral household cleanser. Do not use any abrasive cleaner or cloth.
*In case of system malfunction, turn off the power switch at master station. If this doesn't solve the problem, shut DC power down, and contact a qualified technician.
TECHNICAL PRECAUTIONS | Deutsch |
*Operating temperature: 0°C ~ 40°C (+32°F ~ +104°F).
*Cleaning: Clean the units with a soft cloth dampened with neutral household cleanser. Do not use any abrasive cleaner or cloth.
*In case of system malfunction, turn off the power switch at master station. If this doesn't solve the problem, shut DC power down, and contact a qualified technician.
- 10 -
