SPECIFICATIONS
General
•Dimensions:
Door station: 295(H) × 144(W) × 8(D) (recess: 30) mm
H
H
•Weight:
Door station: approx. 890g (1.97 lbs)
Flush mount back box: approx. 600g (1.3 lbs)
Video door station
•Power supply: Supplied from the master station
•Camera unit: Complementary metal oxide semiconductor (CMOS)
•Scanning lines: 525 lines
•Minimum subject illumination: 5 Lux at 50 cm (1' 6") distance
Access control keypad
•Power supply: 12 - 24V AC
12 - 24V DC
•Power consumption: DC: Max. 70mA AC: Max. 100mA
•Number of relay circuits: 2
•Relay contact: N/O, N/C
•Relay contact capacity: 24V DC, 3A (resistive load) 1A (inductive load)
24V AC, 3A (resistive load)
1A (inductive load)
English Français Nederlands
WARRANTY
Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make the final decision whether there is a defect in materials and/
or workmanship; and whether or not the product is within the warranty. This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in violation of instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This warranty does not cover batteries or damage caused by batteries used in connection with the unit. This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone. Aiphone will not be responsible for any costs incurred involving on site service calls. Aiphone will not provide compensation for any loss or damage incurred by the breakdown or malfunction of its products during use, or for any consequent inconvenience or losses that may result.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
12
