Aiphone NDR-20ARS manual Wiring Diagram System Used for Cctv Camera CALL-UP, NDR-20RS, Ne-Nvp-Ra

Special

Order

Products

NDR-RS

NDR Lamp Memory Master Station with External Control Capability for Rescue Assitance

NDR-10RS NDR-20RS NDR-30RS NDR-40RS NDR-10ARS NDR-20ARS NDR-30ARS NDR-40ARS

- INSTRUCTIONS -

The NDR-nRS Lamp Memory System is designed for use with the NE-NVP-RA Rescue Assistance sub stations. The NE-NVP-RA provides communication and call status indication for applications with ADA requirements for Areas of Rescue Assistance. The NE-NVP-RA features Braille signage, a large red call button, and "call placed" and "help coming" LED indicators. The sub station flush mounts into a 3-gang masonry-type box, or surface mounts in the SBX-NVP. Tamper proof screws are provided, along with a wrench for installation. Remote lamps can be added for better visibility of a station's status. The NDR-nRS master station is equipped with a door release button and a reset button to reset calls at the master station. The NDR-nRS has outputs to activate an external device, such as a CCTV camera when the associated sub station is selected, or selectively controlling the corresponding door strike or maglock.

WIRING DIAGRAM: SYSTEM USED FOR CCTV CAMERA CALL-UP

NDR-20RS

1

2

3

~

20

E

S

H

External

Terminal Block

NE-NVP-RA	NE-NVP-RA	NE-NVP-RA
Red	Red	Red
Green	Green	Green	Leave green
jumper	jumper	jumper	jumper intact
Blu	Blu	Blu
Pur	Pur	Pur
Blk	Blk	Blk
Yel	Yel	Yel
Org	Org	Org

PS-2410A

1

2

3

~

20 L

					BLK	RY-PA
							YEL	Closure for Station #1
						#3
		BLK	RY-PA
					YEL	Closure for Station #2
			#2				Normally Open contacts remain
BLK	RY-PA
		YEL		Closure for Station #3
	#1						closed as long as master has sub

station selected.

+	+	Terminal Block		DUAL FUNCTIONS FROM EACH CHANNEL:
-	-		1		RY-PA
	Equipment for each station that requires			BLK		YEL		Momentary closure #1
	both a constant closure and momentary				#1
	closure when a channel is selected:
	2 RY-PA relays			BLK	RY-PA	YEL		Constant closure #1
	1 Diode (1N4001)		L		#2
Individual Components for System:
NDR-nRSMaster station with selective contact output capability (10, 20, 30, 40)			2				RY-PA
NDR-nARSMaster station w/hndst andcontact output capability (10, 20, 30, 40)									Momentary
						BLK	#1	YEL
ND-20AS 20-call Add-on Selector with selective output capability (Require PS-2410A)									closure #2
			NDR-RS Master
ND-40AS	40-call Add-on Selector with selective output capability (Requires PS-24E)						RY-PA		Constant
RY-PA	Relay for selective output (1 per station requiring external contact)					BLK
			H				#2	YEL
									closure #2
PS-2410A24V DC, 1A Power Supply for 10-20 station systems
PS-24E	24V DC, 2A Power Supply for 30-40 station systems
NE-NVP-RAVandal proof sub station with call status indicators and braille signage			NDR-RS TERMINAL DEFINITIONS:
IMPORTANT:			+	Positive 24V DC
			-	Negative
1. RY-PA must be used for each additional contact
			1~40	Station number
to isolate AC voltage from the intercom circuit.
			E	Common communication
2. Extra contact connections and L are on separate
			S	Sends "call placed" tone to sub
terminal block. NDR-30/40RS have two terminal blocks.
			H	Resets call signals at sub when RESET
									Pg. 1
				button is pressed.