Air King 4CH68G, 9500G specifications Description, Specifications, General Safety Information

MODEL /MODELO/ MODÉLE 4CH68G/9500G

OPERATING INSTRUCTIONS & PARTS MANUAL

20" DELUXE PIVOT FAN

MODEL 4CH68G/9500G

This Fan is not intended to be used in

commercial, industrial or agricultural settings.

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT

DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY

WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

			RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
DESCRIPTION						WARNING: USE OF A THREE-PRONG TO TWO-PRONG
The Air King 20" (50.8 cm) Deluxe Pivot Fan features 3 speed whis-						ADAPTER IS NOT RECOMMENDED. IMPROPER
						CONNECTION MAY CREATE THE RISK OF ELECTRO-
per-quiet operation, a 5-paddle fan blade, and 120° adjustable tilt.
						CUTION. USE OF SUCH ADAPTERS IS NOT PERMITTED
The fan has a permanently lubricated motor with a 6 ft. (1.8 m) 18/3
						IN CANADA.
cord set.
						WARNING: THIS PLUG IS A SAFETY FEATURE. TO
SPECIFICATIONS
						REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND
Motor .................................120V, 60 Hz						PERSONAL INJURY, DO NOT REMOVE, REPLACE, REPAIR
Blade diameter ...................20" ( 50.8 cm)
						OR TAMPER WITH THE ORIGINALLY SUPPLIED PLUG. IF
Speeds ...............................3
						THE FAN DOES NOT FUNCTION PROPERLY, IT MAY BE
Control ................................Rotary Switch
Air flow distribution .............120°						DUE TO THE SAFETY DEVICE INCORPORATED IN THIS
Approvals............................UL Listed. Close mesh fan guard						PLUG. CONTACT YOUR GRAINGER DISTRIBUTOR.
			meets OSHA requirements.			8. Where possible, avoid the use of extension cords. If they must
		MODEL	4CH68G/9500G			be used, minimize the risk of overheating by ensuring that they
		SPEED	HIGH	MED	LOW	are UL listed. Never use a single extension cord to operate more
		CFM	2470	2055	1570	than one Fan.
						9. Do not operate any Fan with a damaged cord or plug or after the
		M3/s	1.17	0.97	0.74
		RPM	1137	1018	777	Fan malfunctions, has been dropped or damaged in any manner.
						Return Fan to authorized service facility for examination, electrical
		Amps	1.05	0.82	0.62
						or mechanical adjustment or repair.
		Watts	129	106	79
						10.Do not insert or allow fingers or foreign objects to enter any
		dB A	64	60	52
						ventilation or exhaust opening as it may cause an electric shock
GENERAL SAFETY INFORMATION						or fire, or damage the Fan. Do not block or tamper with the Fan
						in any manner while it is in operation.
When using electrical appliances, basic						11.Always place the Fan on a stable, flat, level surface when operating,
precautions should always be followed to						to avoid the chance of the Fan overturning. Locate the Power Cord
reduce the risk of fire, electric shock and injury						so the Fan or other objects are not resting on it. Do not run Power
to person, including the following:						Cord under carpeting. Do not cover Power Cord with throw rugs,
1. Read all instructions before using Fan.						runners, or the like. Arrange Power Cord away from room traffic
						and where it will not be tripped over.
2.	Make certain that the power source conforms to the electrical
	requirements of the Fan.					12.This Fan is not intended for use in wet or damp locations. Never
3.	Use this Fan only as described in this manual. Any other use					locate a Fan where it may fall into a bathtub or other water container.
	not recommended by the manufacturer may cause fire, electrical					13. Do not use Fan outdoors.
	shock, or injury to persons.					14.This Fan is not suitable for use in agricultural facilities including
4. Unplug power cord before installing, servicing, or moving the Fan.
						areas where livestock, poultry or other animals are confined.
WARNING: DO NOT DEPEND UPON THE ON-OFF SWITCH AS
						Please refer to National Electric Code (NEC) Article 547-7 (2002),
THE SOLE MEANS OF DISCONNECTING POWER WHEN
						or applicable state or local codes or standards relating to electrical
INSTALLING OR SERVICING THE FAN. ALWAYS UNPLUG THE
POWER CORD.						requirements for Agricultural Buildings. THIS FAN DOES NOT
5. This Fan must NOT be used in potentially dangerous						MEET THE REQUIRMENTS OF NEC ARTICLE 547-7 (2002).
	locations such as flammable, explosive, chemical-laden					15.This Fan is not suitable for use in hazardous locations. Please refer to
	or wet atmospheres.
						National Electric Code (NEC) Article 500 or applicable state or local
6.	DO NOT use Fan in or near a window. Rain may create an
						codes or standards relating to electrical requirements for Hazardous
	electrical hazard.
						locations. THIS FAN DOES NOT MEET THE REQUIRMENTS OF
7. The power cord is equipped with a three-prong grounded plug
						NEC ARTICLES 500 (2002)
	that must be inserted into a matching receptacle. Under no
	circumstances must the grounding prong be cut off the plug.					WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
	Where a two-prong wall receptacle is encountered, it must be					– DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED
	replaced with a properly grounded three-prong receptacle installed					CONTROL DEVICES.
	in accordance with the National Electrical Code (NEC) and all					SAVE THESE
	applicable local codes and ordinances. This work must be done
	only by a qualified electrician, using copper wire only.
						INSTRUCTIONS

Rev. P 6/07 8 2084007 Rev. P 6/07 1 2084007