Airlink UG-ASW224-1103 manual Unpacking & Installation

24-Port 10/100Mbps Ethernet Switch User Guide

anytime later without needing to change the Switch or reconfigure the network.

The Switch combine dynamic memory allocation with store- and-forward switching to ensure that the buffer is effectively allocated for each port, while controlling the data flow between the transmit and receive nodes to guarantee against all possible packet loss.

The Switch is an unmanaged 10/100 Fast Ethernet Switch that offers solutions in accelerating small Ethernet workgroup bandwidth. Other key features are:

•24-port 10/100Mbps Ethernet Switch with RJ-45 connectors

•Support auto-negotiation for speed and duplex modes for each port

•Supports auto-MDI/MDI-X for each port

•Wire speed reception and transmission

•Store-and-Forward switching method

•Integrated address look-up engine, supports 8K absolute MAC addresses

•Supports 2.5-Mbits RAM for data buffering

•Front-panel diagnostic LEDs

•IEEE 802.3x flow control for full-duplex

•Back pressure flow control for half-duplex

•Standard 19" Rack-mountable size

Unpacking & Installation

This chapter provides unpacking and setup information for the Switch.

10 AirLink+