Airlink UG-ASW224-1103 manual Rear Panel, AC Power Connector

24-Port 10/100Mbps Ethernet Switch User Guide

end node is Network Interface Card (NIC) or switches and hubs.

Rear Panel

The AC power connector is located on the rear panel and is

athree-pronged connector that supports the power cord (see Figure 5). Plug in the female connector of the provided power cord into this connector, and the male into a power outlet. The Switch supports input voltages from 100 to 240 AC at 50 to 60 Hz.

Figure 5. AC Power Connector

Rear of Switch

AC Power Connector

16 AirLink+