recommended that you input the Default Gateway of your network, which is the IP address of your router. Check with your router manufacturer for that information.
THIS IS MANDATORY IF YOU WANT TO USE FTP OR EMAIL FUNCTIONS
-PPPoE: Select this option when you use a direct connection via DSL modem. You should have a PPPoE account from your Internet service provider. Enter your DSL account’s User Name and Password given by your DSL service provider. The camera will get an IP address from the ISP as starting up. If you are using a router, do NOT select this option.
NOTE Once the camera gets an IP address from the ISP as starting up, it automatically sends a notification email to you. Therefore, when you select PPPoE as your connecting type, you have to set up the email or DDNS configuration in advance.
DDNS Setting
With the Dynamic DNS feature, you can assign a fixed host and domain name to a dynamic Internet IP address. To set up the DDNS:
1.Check Enable checkbox to enable this feature.
2.Select a DDNS Provider from the
3.Enter the required information in the Host Name, User Name, and Password boxes.
UPnP
The camera supports UPnP (Universal Plug and Play), which is a set of computer network protocols that enable the
Ports Number
-HTTP Port: The default HTTP port is 80. Some ISP’s have port 80 blocked. If you are having problems, you can change it to some other port. The suggested port to be used is anything between 1024 to 65535
-RTSP Port: Configure the transmission of streaming data within the network. The default RTSP (Real Time Streaming Protocol) port is 554. To view the
rtsp://(IP address of the camera)/mpeg4.
- 25 -
