Event Configuration >> Schedule Trigger

You can configure the schedule for trigger function of the camera individually by Email, FTP, and NAS. Select the Enable option on each item, and then select a Schedule Profile from the pull-down list and set the Interval time.

Event Configuration >> GPIO Trigger

This feature needs to be configured if you attach a device with GPIO interface to the camera (i.e. alarm system)

￿GPIO Trigger: Check the Enable option to enable the GPIO trigger function of the camera, so that you can set Trigger Out function or send captured images within the detecting area to the FTP server, email receiver, Network Storage server, or send an instant message. You have to configure corresponding settings, such as FTP server and email server, to enable this feature.

-Schedule Profile: Select a schedule profile from the pull-down list.

-Action: Set the Trigger Out function or select the destination that the captured images will be

sent to: Save Image to USB, Record to Network Storage, Send Email, or FTP Upload.

-40 -

Page 41
Image 41
Airlink101 AICN1777W user manual Event Configuration Schedule Trigger, Event Configuration Gpio Trigger