2.2 Connecting the Camera to LAN/WLAN
Use the provided Ethernet cable to connect the camera to your local area network (LAN). When you connect the AC power adapter, the camera is powered on automatically. You can verify the power status from the Power LED on the front panel of the camera. Once connected, the Link LED starts flashing green light and the camera is on standby and ready for use now.
Connecting the Ethernet Cable
If you use a wireless network in your application environment, you need to attach the included external antenna to the camera. When the camera is powered on, the camera will automatically search any access point with “airlink101” SSID.
Connecting the External Antenna
NOTE If the camera cannot connect to your wireless network, you need to
first install the camera in LAN and then proceed with WLAN settings.
- 8 -
