4.6 Motion Detect
*This function can only be configured in Windows Internet Explorer.
The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera. The camera provides two detecting areas.
To enable the detecting area, select Window 1 or 2 from the
-Name: Assign a name to the detecting area.
-Threshold: Move the slide bar to adjust the sensitivity of motion detection. Make sure the threshold (the horizontal line) is low (sensitive) enough, such that the signal (appear when motion detected) goes over the threshold line, and at the same time the events (i.e, emailing snapshot, FTP uploading) you set up in Event Config are triggered.
- 37 -
