Section 5
Wireless Troubleshooting
If you are experiencing problems with the wireless connection (print server does not appear when you click discover, print jobs do not consistently work/finish, only able to communicate with the print server intermittently) you will want to tune your router’s signal by changing channels on the router.
You do not need to change the channel on the print server, it will automatically pick up the new channel after you unplug the power and plug it back in.
Your router has 11 different channels to choose from. Start with channel 1 and work your way up. Each time you change the channel on the router, make sure that you unplug the power from the print server and plug it back in. Keep going through the channels until you find one that gives you a stable connection.
To check if the print server is connected wirelessly, disconnect the networking cable from the print server and open the
For instructions on changing channels, refer to the documentation that came with your router.
