9
3. Click Site Survey button. The system
will automatically scan and display the scan
results of all AP existing near by the system
4. Use Main_AP as an example here where the
AP is encrypted via WPA2-PSK/ AES security
type. Click Select button of the Main_AP, and then
click Next button.
1. Follows steps 1-6 (Select “Client Bridge”
mode on step 4) in Section 3 Configuring
the Access Point. Make sure you change
the IP address of the Client Station to be
different.
2. Configure the DHCP Serve
r
settings to
match your demandand then click Next
button.