Apple 12/640PS manual For example, LPT2, or a NetWare queue, Should suffice, This chapter

	13	Select another Apple LaserWriter printer, if you want, and click Install to install. Repeat
		for each printer you want to install.
		You can install other Apple LaserWriter printers supported by the software.
`		When you’re done, click Close.
	14
		A message appears telling you to use the Printers control panel to connect
		and set up the printers you've installed. By default, each printer uses LPT1.
		The Printers control panel Setup dialog box lets you specify a different port,
		for example, LPT2, or a NetWare queue.
		Installation is complete.
		Choose how to proceed:
	15
		For users connected via the parallel cable, the default printer driver settings
		should suffice.
		For instructions on using the Apple LaserWriter Utility, see “Setting
		Additional Parameters With the Apple LaserWriter Utility for Windows,” later
		in this chapter.
		To configure your printer software with NetWare, see “Initial Novell NetWare
		Setup,” later in this chapter.

Installing onto a server

You can install the software on a server for users who share the server’s copy of Windows. Follow the steps given below and specify the appropriate server volumes and paths.

You can also copy the software folders from the CD-ROM disc to a hard disk. Your users can install the software from the server as described below.

70Chapter 3