Apple 12/640PS manual Configuring Atps for the first time on a NetWare 3.x server

12If necessary, edit the Spooler’s AppleTalk Name field and press Esc to complete the setup.

Note: You can also edit information about the print server or spooler. See the documentation provided with NetWare for more information.

13Press Esc to exit the utility.

A prompt appears, asking if you want to create a new file.

14Select Edit SYS:\SYSTEM\AUTOEXEC.BAT from the list of options and press Enter.

A window appears, displaying the field's contents.

15Insert the following line after the load afp statement. load atps

This command instructs the NetWare server to load the ATPS service automatically at startup time.

16Press Esc until the Install utility quits.

17At the service console prompt, type load atps and press Enter.

The service is loaded and immediately becomes available to network users. A message appears confirming the load, and the console returns to the command line prompt.

Configuring ATPS for the first time on a NetWare 3.x server

If you are setting up the printer for access by Mac OS computers on a NetWare 3.x network and this is the first time you are configuring ATPS, follow these instructions.

You can configure ATPS from the server console, or by running RCONSOLE (remote console) from a client computer.

1At the console prompt, type load install

The Install utility starts and a list of Installation Options appears.

Setting up the Printer as an ATPS Remote Printer 325