Apple 12/640PS manual Window appears, displaying the file’s contents

9Select the SYS:\SYSTEM\AUTOEXEC.NCF file and press Enter.

A window appears, displaying the file’s contents.

10Insert the following line after the load afp statement: load atps

This command instructs the NetWare server to automatically load the ATPS service at startup time.

11Press Esc to exit the editor, then type y and press Enter to confirm the changes.

12Press Esc three times to exit the Install utility.

13At the system console prompt, type load atps and press Enter.

The service is loaded and immediately becomes available to network users. A message appears confirming the load, and the console displays its prompt.

Modifying an existing ATPS configuration on a NetWare 3.x server

The procedure for modifying an existing ATPS configuration is similar to the procedure for creating a new configuration. The primary difference is that you are modifying an existing AUTOEXEC.NCF file instead of creating a new one.

1At the console prompt, type load install

The Install utility starts and a list of Installation Options appears.

2Select Product Options from the list and press Enter.

A list of product options appears. If the NLM is installed and operating properly, a NW-MAC option will be available.

3Select the NW-MAC option and press Enter.

A list of configuration files appears.

4From the list, select the file SYS:\SYSTEM\ATPS.CFG and press Enter.

A prompt appears, asking if you want to create a new file.

Setting up the Printer as an ATPS Remote Printer 327