18Choose how to proceed:

For users connected via the parallel cable, the default printer driver settings should suffice.

For instructions on using the Apple LaserWriter Utility for Windows, see “Setting Additional Parameters With the Apple LaserWriter Utility for Windows,” later in this chapter.

To configure your printer software with NetWare, see “Initial Novell NetWare Setup,” later in this chapter.

Installing the printer software for Windows NT

Use the setup program on WIN31/DISK1 on the CD, or use the Windows 3.1 floppy disks to install software for Windows NT. The steps to install the PostScript Printer Description (PPD) file for the LaserWriter 12/640 PS (or other Apple printer) on a Windows NT system are similar to those in the previous sections for Windows 3.1, except that you select Custom Installation (step 9) and click “Windows NT Printer Software.” Make sure the other checkboxes are deselected, then follow these steps:

1Click Install. Instructions for installing the Windows NT software appear.

2Click Continue.

The Print Manager appears.

3Choose Create Printer from the Print Manager’s Printer menu.

4

5

6

The Create Printer dialog box appears.

Select Other (at the bottom of the list) in the Driver Combo box. Enter the pathname for Disk 2.

Select the printer driver that corresponds to your printer and click OK.

Setting Up the Printer for Windows, DOS, and NetWare Users

77

Page 102
Image 102
Apple 12/640PS Installing the printer software for Windows NT, Print Manager appears, Create Printer dialog box appears