Apple 12/640PS manual DOS notes, Using the Apple LaserWriter Utility for Windows

7If you changed any printer settings to print a PostScript file, choose Setup to display the Setup dialog box. Undo any changes you made and then choose OK.

The Printers dialog box appears.

8Select OK to close the Printers dialog box.

9Choose Exit from the Settings menu to close the Control Panel.

DOS notes

If you are using DOS programs, refer to the manual that came with your program and follow the instructions for using a PostScript printer. Most DOS programs are PostScript compatible.

Capturing a print queue for DOS printing

From DOS, you can use the NetWare CAPTURE command to map the parallel port to a print queue.

mLog in to the NetWare network and enter the CAPTURE command, using the following syntax:

CAPTURE /q=queue_name local=lptnumber server=server_name job=new

Unless you specify otherwise, the command assumes that you are mapping the LPT1 port to a queue.

Using the Apple LaserWriter Utility for Windows

The Apple LaserWriter Utility for Windows program supplied with the printer software lets the printer administrator control various aspects of how the printer works. For information about installing and using the Apple LaserWriter Utility for Windows, see Chapter 3.

224Chapter 7